Belongs to: PRO UUTUUS2020 MXUUTUUS20 EN
Note! This product is available from another stock. The expected shipping time for this product is Dispatched within 1-3 workdays.
Delivery costs starting from 0 € (pickup from store). Read more about our delivery conditions...
Store availability:
| On the Web | Tku | Vantaa | Tre | Lahti | Jkl |
|---|---|---|---|---|---|
 |
 |
|
|
|
|
Key:
in stock- available
- on request
out of stock
If you have questions about this product, please contact us! Click here to send us a question.
SKF Mud Scraper is a removable dried mud scraper made of SKF proprietary low friction, low wear material named X-ECOPUR. Product can be easily installed and removed by end consumer. Forks removal from the triple clamps is not required. Product is designed to work over OEM forks wear rings and is compatible with OEM dust seals. However SKF recommends application with SKF fork seals kit for the lowest friction possible experience.
- The products objective is to protect the fork seals from being damaged by small debris and dried mud which are the real killer of oil seal lips. The dust seal is designed to keep out as much water as possible; small particles; powder and liquid mud. Unfortunately, in many riding circumstances, liquid mud may have enough time to dry over the lower part of the chrome tube.
- If your forks have dry mud built up on them, the first jump landing or hard braking your forks will dive seals down into the section where the mud has accumulated and dried. Dirt particles will not move passing through the dust seal (which is not designed to scrape but to wipe!) and most likely will damage your oil seal lip triggering leakage.
- The Mud Scraper is designed to scrape! It will constantly clean your tubes removing hard, dried particles leaving the dust seal the job of keeping out water and powder.
Usage recommendations
- Product should be only used when riding in extreme wet-muddy conditions
- Product should not be used in dry riding conditions. Using the product in dry conditions will not affect product performance or durability
- Check for interference with your hole shot device where applicable
- Check for interference with non-OEM fork protection shields.
- Product shall be placed over OEM outer tube steel wear rings (with except of WP forks). Please check your steel wear rings are in good conditions. Should they be worn they may affect the capacity of the mud scraper to stay fixed over the forks
- Product shall not be used in conjunction with other seal savers products
- Remove SKF Mud Scraper after riding and properly clean with water
Compatible bikes:
(show all)- Husqvarna CR125 2007-2009
- Husqvarna TC250 2006-2009
- Husqvarna TC450 2006-2009
- TM 125ENDURO 2007-2017
- TM 125MX 2007-2012
- TM 250ENDURO 2007-2017
- TM 250MX 2007-2012
- TM 300ENDURO 2007-2017
- TM 300MX 2007-2012
- TM 450ENDURO 2007-2017
- TM 450MX 2007-2012
- TM 530ENDURO 2007-2017
- TM 530MX 2007-2016
- . . .
