OC1 Offroad Cleaner 950 ml - "For effective and safe cleaning!"

Characteristics:

• Specially developed: For off-road motorcycles and MTB bikes.

• Tested under the toughest conditions: by European motocross riders, including the well-known and successful German MX-GP rider Max Nagl.

• Effective cleaning: Safely, powerfully and effectively cleans all surfaces of off-road motorcycles and MTB bikes without attacking them.

• Environmentally friendly: The formula is based on the latest findings from the chemical industry and is environmentally friendly.

OC1-Offroad Cleaner 950 ml is your ideal partner for cleaning and caring for off-road motorcycles and MTB bikes.

The OC1 Offroad Cleaner 950 ml is a high-performance cleaner that was specially developed for off-road motorcycles and MTB bikes. OC1 was developed and tested under the toughest conditions by European motocross riders, including the well-known and successful German MX-GP rider Max Nagl.

The OC1 formula is based on the latest findings from the chemical industry, thanks to which OC1 cleans all surfaces of off-road motorcycles and MTB bikes safely, powerfully, effectively and in an environmentally friendly manner without attacking them. The product is ready to use and should be used without dilution.

Application:

The product is ready to use. Use without dilution. Rinse surfaces with water. Apply to the dirty surface with a sprayer and rinse with water after 1-2 minutes. Use a brush in hard-to-reach places. Note: Do not use the product on hot surfaces.

Thank you for choosing OC1 Offroad Cleaner, the ultimate solution for cleaning and caring for your motorcycle, quad, or off-road vehicle. This manual will guide you on how to use our powerful ecological cleaner to achieve the best cleaning results for your bike.

1. Rinse: Start by rinsing your motorcycle, quad, or off-road vehicle thoroughly with water to remove any loose dirt or debris. This will help to avoid any scratches or damage during the cleaning process.
2. Spray: Spray the OC1 Offroad Cleaner generously all over the surface of your bike, ensuring to cover all areas, including components.
3. Wait: Allow the product to work for 1-2 minutes, depending on the level of dirt or grime on your bike. This will give the product enough time to penetrate and break down any stubborn dirt.
4. Agitate: For any stubborn grime or mud, use a brush or sponge to agitate the surface and help to loosen the dirt. This will ensure a thorough cleaning of your bike.
5. Rinse: Rinse off the entire bike thoroughly with fresh, clean water. Use low or high-pressure water depending on your preference. It is recommended to rinse before the product dries to ensure maximum effectiveness.
6. Dry: Allow the bike to dry naturally or wipe it down with a microfiber cloth to achieve a perfect finish. Do not use on heated surfaces or under direct sunlight.

Usage:

The OC1 Offroad Cleaner is ready to use, so do not dilute it. Apply the preparation to the cleaned surface and wait for 1-2 minutes. Then wash off with low or high-pressure water. Allow the surface to dry or wipe it with a microfiber cloth.

With the OC1 Offroad Cleaner, cleaning your motorcycle, quad, or off-road vehicle has never been easier. Say goodbye to stubborn dirt, mud, and grime, and achieve a perfect finish every time. Keep your bike in top condition with the ultimate cleaning solution from OC1.