Belongs to: PRO UUTUUS2020 MXUUTUUS20 EN
Normal delivery time is 1-2 days.
Delivery costs starting from 0 € (pickup from store). Read more about our delivery conditions...
Store availability:
On the Web | Tku | Vantaa | Tre | Lahti | Jkl |
---|---|---|---|---|---|
Key:
- in stock
- available
- on request
- out of stock
If you have questions about this product, please contact us! Click here to send us a question.
SKF Mud Scraper is a removable dried mud scraper made of SKF proprietary low friction, low wear material named X-ECOPUR. Product can be easily installed and removed by end consumer. Forks removal from the triple clamps is not required. Product is designed to work over OEM forks wear rings and is compatible with OEM dust seals. However SKF recommends application with SKF fork seals kit for the lowest friction possible experience.
- The products objective is to protect the fork seals from being damaged by small debris and dried mud which are the real killer of oil seal lips. The dust seal is designed to keep out as much water as possible; small particles; powder and liquid mud. Unfortunately, in many riding circumstances, liquid mud may have enough time to dry over the lower part of the chrome tube.
- If your forks have dry mud built up on them, the first jump landing or hard braking your forks will dive seals down into the section where the mud has accumulated and dried. Dirt particles will not move passing through the dust seal (which is not designed to scrape but to wipe!) and most likely will damage your oil seal lip triggering leakage.
- The Mud Scraper is designed to scrape! It will constantly clean your tubes removing hard, dried particles leaving the dust seal the job of keeping out water and powder.
Usage recommendations
- Product should be only used when riding in extreme wet-muddy conditions
- Product should not be used in dry riding conditions. Using the product in dry conditions will not affect product performance or durability
- Check for interference with your hole shot device where applicable
- Check for interference with non-OEM fork protection shields.
- Product shall be placed over OEM outer tube steel wear rings (with except of WP forks). Please check your steel wear rings are in good conditions. Should they be worn they may affect the capacity of the mud scraper to stay fixed over the forks
- Product shall not be used in conjunction with other seal savers products
- Remove SKF Mud Scraper after riding and properly clean with water
Compatible bikes:
(show all)- Beta RR 125 2018-2020
- Beta RR 250 2013-2019
- Beta RR 300 2013-2019
- Beta RR 350 2012-2019
- Beta RR 400 2012-2014
- Beta RR 450 2011-2014
- Fantic Motor XE125 2021
- Gas Gas EC200 2011-2019
- Gas Gas EC250 2011-2019
- Gas Gas EC250F 2018-2019
- Gas Gas EC300 2018-2019
- Gas Gas EC300F 2018-2019
- Husqvarna CR125 2010-2013
- Husqvarna TC250 2010-2013
- Husqvarna TC449 2011-2013
- Husqvarna TC450 2010
- Husqvarna TC510 2010
- Husqvarna TE250 2010-2013
- Husqvarna TE310 2010-2013
- Husqvarna TE449 2011-2013
- Husqvarna TE450 2010
- Husqvarna TE510 2010
- Husqvarna TE511 2011-2013
- Husqvarna WR125 2011-2013
- Husqvarna WR250 2010-2013
- Husqvarna WR300 2011-2013
- Kawasaki KLX450 2007-2012
- Kawasaki KX125 2002-2008
- Kawasaki KX250 2002-2008
- Kawasaki KX250F 2004-2005
- Kawasaki KX450F 2006-2012
- Sherco 125SE-R 2018-2019
- Sherco 250SE-R 2018-2019
- Sherco 300SE-R 2018-2019
- Stark VARG 2023-2025
- Suzuki RM-Z250 2004-2006
- TM 125MX 2013-2019
- TM 250MX 2013-2019
- TM 450MX 2013-2019
- Yamaha WR250F 2005-2022
- Yamaha WR450F 2005-2019
- Yamaha YZ125 2004-2022
- Yamaha YZ250 2004-2022
- Yamaha YZ250F 2004-2023
- Yamaha YZ450F 2004-2021
- . . .