Belongs to: PRO UUTUUS2020 MXUUTUUS20 EN
Normal delivery time is 1-2 days.
Delivery costs starting from 0 € (pickup from store). Read more about our delivery conditions...
Store availability:
On the Web | Tku | Vantaa | Tre | Lahti | Jkl |
---|---|---|---|---|---|
Key:
- in stock
- available
- on request
- out of stock
If you have questions about this product, please contact us! Click here to send us a question.
SKF Mud Scraper is a removable dried mud scraper made of SKF proprietary low friction, low wear material named X-ECOPUR. Product can be easily installed and removed by end consumer. Forks removal from the triple clamps is not required. Product is designed to work over OEM forks wear rings and is compatible with OEM dust seals. However SKF recommends application with SKF fork seals kit for the lowest friction possible experience.
- The products objective is to protect the fork seals from being damaged by small debris and dried mud which are the real killer of oil seal lips. The dust seal is designed to keep out as much water as possible; small particles; powder and liquid mud. Unfortunately, in many riding circumstances, liquid mud may have enough time to dry over the lower part of the chrome tube.
- If your forks have dry mud built up on them, the first jump landing or hard braking your forks will dive seals down into the section where the mud has accumulated and dried. Dirt particles will not move passing through the dust seal (which is not designed to scrape but to wipe!) and most likely will damage your oil seal lip triggering leakage.
- The Mud Scraper is designed to scrape! It will constantly clean your tubes removing hard, dried particles leaving the dust seal the job of keeping out water and powder.
Usage recommendations
- Product should be only used when riding in extreme wet-muddy conditions
- Product should not be used in dry riding conditions. Using the product in dry conditions will not affect product performance or durability
- Check for interference with your hole shot device where applicable
- Check for interference with non-OEM fork protection shields.
- Product shall be placed over OEM outer tube steel wear rings (with except of WP forks). Please check your steel wear rings are in good conditions. Should they be worn they may affect the capacity of the mud scraper to stay fixed over the forks
- Product shall not be used in conjunction with other seal savers products
- Remove SKF Mud Scraper after riding and properly clean with water
Sold in pairs.
Compatible bikes:
(show all)- Gas Gas EC250 2021-2025
- Gas Gas EC250F 2021-2022
- Gas Gas EC300 2021-2022
- Gas Gas EC350F 2021-2022
- Gas Gas MC125 2021-2022
- Gas Gas MC250 2022
- Gas Gas MC250F 2021-2024
- Gas Gas MC350F 2022
- Gas Gas MC450F 2021-2022
- Husqvarna FC250 2014-2022
- Husqvarna FC350 2014-2022
- Husqvarna FC450 2014-2022
- Husqvarna FE250 2014-2022
- Husqvarna FE350 2014-2022
- Husqvarna FE450 2004-2012
- Husqvarna FE501 2014-2022
- Husqvarna TC125 2014-2022
- Husqvarna TC150 2025
- Husqvarna TC250 2014-2022
- Husqvarna TE125 2013-2016
- Husqvarna TE250 2014-2021
- Husqvarna TE300 2013-2022
- Husqvarna TX125 2017-2019
- KTM 125 XC-W 2017-2019
- KTM 125EXC 2003-2016
- KTM 125SX 2003-2022
- KTM 150 XC-W 2017-2019
- KTM 150SX 2008-2025
- KTM 200EXC 2003-2016
- KTM 250EXC 2003-2022
- KTM 250EXC RACING 2003-2006
- KTM 250EXC-F 2007-2022
- KTM 250SX 2003-2025
- KTM 250SX-F 2007-2022
- KTM 300EXC 2003-2022
- KTM 350EXC-F 2012-2022
- KTM 350SX-F 2011-2022
- KTM 400EXC-F 2009-2011
- KTM 450EXC-F 2003-2022
- KTM 450SMR 2003-2014
- KTM 450SX-F 2003-2022
- KTM 500EXC 2012-2022
- KTM 525EXC-F 2003-2007
- KTM 525SMR 2003-2007
- KTM 525SX-F 2003-2007
- KTM 530EXC 2008-2011
- KTM 690 ENDURO 2008-2018
- Sherco 125SE-R 2018-2019
- Sherco 250SE-R 2012-2018
- Sherco 300SE-R 2012-2018
- . . .